77350 BINARY Wire Appx Awg Shld Unshielded Communicat

Review BINARY Wire Appx 275 1pr Awg Shld 1p 2/c Unshielded Communicat

The Binary 77350 wire is a versatile communication cable ideal for various applications. This wire comes with an approximate length of 275 feet and features one pair of two-conductor, 18 gauge unshielded wires. Each wire in this pair is made up of one conductor, making it a single-pair, two-conductor cable.

The 18 AWG (American Wire Gauge) size of the conductors signifies their small diameter, which is commonly used for applications that require flexibility and ease of installation. The unshielded design of this cable implies that it does not have an outer protective layer of shielding to block electromagnetic interference.

This wire is suitable for various communication applications, including data, telephone, and control systems. The 1P 2C (one pair, two conductor) configuration of the cable ensures reliable signal transmission between two devices. While it may not offer the same level of protection against electromagnetic interference as shielded cables, unshielded cables like the Binary 77350 offer several advantages, such as easier installation, lower cost, and increased flexibility.

The Binary 77350 wire is made up of 18 individual conductors, each with a diameter of 18 AWG. The wire's length of 275 feet makes it suitable for long-distance communication applications, while its unshielded design makes it an excellent option for applications where costs and installation ease are priorities.

In summary, the Binary 77350 wire is a flexible and cost-effective communication cable with a length of 275 feet and a 1P 2C, 18 AWG, unshielded configuration. It is well-suited for various communication applications where electromagnetic interference protection is not a primary concern.

Pros and Cons of Buying a 275 ft. 1pr 2/3 18 AWG Unshielded Communication Cable (Binary 77350)

a. Cost-Effective: This cable is relatively inexpensive compared to shielded cables or higher-gauge wires.

b. Flexibility: Its unshielded design makes it more flexible than shielded cables, making it easier to install and work with in tight spaces.

c. Lightweight: The lightweight nature of unshielded cables makes them easier to handle and transport.

d. Suitable for Short Runs: If you're working on a short communication line, unshielded cables can provide adequate performance with minimal signal interference.

a. Susceptibility to Electromagnetic Interference (EMI): Unshielded cables are more susceptible to EMI, which can result in signal degradation or loss.

b. Limited Distance: Due to their susceptibility to interference, unshielded cables are not recommended for long-distance communication lines.

c. Lower Data Transfer Rates: Unshielded cables may not support high data transfer rates like shielded cables.

d. Not Ideal for Industrial Applications: If you're working in an industrial environment with heavy electrical interference, shielded cables are a better choice.

The Binary 77350 275 ft. 1pr 2/3 18 AWG Unshielded Communication Cable has its advantages, such as cost-effectiveness, flexibility, and lightweight design. However, it also comes with some disadvantages, including susceptibility to EMI, limited distance capabilities, and lower data transfer rates. If you're working on a short communication line in a relatively quiet environment, this cable could be a cost-effective solution. However, for long-distance communication lines or industrial applications, it's recommended to invest in a shielded cable to ensure better performance and minimize signal interference.

Based on the pros and cons discussed above, if you're looking for a cost-effective solution for a short communication line in a relatively quiet environment, the Binary 77350 275 ft. 1pr 2/3 18 AWG Unshielded Communication Cable could be a good choice. However, if you're working in an industrial environment or need to cover longer distances, it's recommended to invest in a shielded cable to ensure better performance and minimize signal interference.

Details:

The product is a Binary wire measuring approximately 275 feet. It consists of 1 pair wires, with one wire shielded and the other unshielded. The shielded wire is 22 awg, while the unshielded 18 awg. The model number is SP-CRST1-1000 and it manufactured in china.

specifications alarmpartsacc:

• brand: Binary
• mpn: 77350
• model: Sp-crst1-1000
• part type: Wire
• custom bundle: No
• country/region of manufacture: China
• unit quantity: 275
• upc: 842822022026

seller alarmpartsacc:

• rating: 100.0%
• city: allenton, michigan
• # reviews: 462

shipping alarmpartsacc:

• service: usps priority mail
• carrier: usps
• class: expedited
• transit: 3-8 days
• type: calculated

offer alarmpartsacc:

• started: april 8, 2025
• in stock #: 1
• options: ship-to-home
• best offers: true
• availability: in stock
• price: $90.00
• item condition: New – Open box
• sold #: 18

general alarmpartsacc:

• category: Business & Industrial > Surveillance Equipment > Systems > Alarm Parts Accessories

payments alarmpartsacc:

• other
• wallet: apple-pay
• credit card: diners-club

returns alarmpartsacc:

• policy: no returns