FA-1404C-1-2N-03-500 ANIXTER Unshielded Fire Alarm Cable

Review ANIXTER 14awg Unshielded Fire Alarm Cable

The Anixter FA-1404C-1-2N-03-500 is a high-quality 14 AWG unshielded fire alarm cable specifically designed for use in fire alarm systems. This cable is a crucial component in ensuring the safety and protection of buildings and their occupants by providing a reliable and dependable communication path for fire alarm signals.

The Anixter FA-1404C-1-2N-03-500 is constructed using 14 AWG copper conductors, which provide sufficient electrical conductivity for transmitting fire alarm signals over long distances with minimal signal loss. The cable is also UL-listed for use in fire alarm systems, ensuring that it meets the highest standards of safety and reliability.

The Anixter FA-1404C-1-2N-03-500 is a two-conductor cable, each conductor being individually insulated with a high-density polyethylene (HDPE) insulation. The cable is also twisted in a pair to reduce electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring that the fire alarm signals are transmitted with minimal distortion.

The cable is also jacketed with a flame-retardant PVC jacket, which provides excellent protection against physical damage and chemical corrosion. The jacket is also rated for use in plenum and riser applications, making it suitable for use in a wide range of building environments.

The Anixter FA-1404C-1-2N-03-500 is also terminated with bare copper conductors, making it easy to connect to fire alarm devices such as smoke detectors, heat detectors, and alarm panels. The cable is also available in various lengths, making it easy to customize a fire alarm system to meet the specific needs of a building.

In conclusion, the Anixter FA-1404C-1-2N-03-500 is a high-quality unshielded fire alarm cable that provides reliable and dependable communication paths for fire alarm signals. Its 14 AWG copper conductors, UL-listing, and flame-retardant PVC jacket make it an excellent choice for use in fire alarm systems. Its two-conductor design, twisted pair construction, and bare copper conductors make it easy to connect to fire alarm devices, and its availability in various lengths makes it easy to customize a fire alarm system to meet the specific needs of a building.

1. Compliance with NFPA and UL standards: This cable is designed to meet the National Fire Protection Association (NFPA) and Underwriters Laboratories (UL) standards for fire alarm systems, ensuring safety and reliability.

2. Durable construction: The cable is made with high-quality materials, including a PVC jacket and copper conductors, which can withstand harsh environmental conditions and provide excellent electrical performance.

3. Flexibility: The 14AWG unshielded design allows for easy installation and flexibility in routing the cable through walls and around corners.

4. Cost-effective: Compared to shielded cables, unshielded cables are generally less expensive, making them a cost-effective solution for many fire alarm applications.

1. Limited protection against electromagnetic interference (EMI): Since this cable is unshielded, it may be more susceptible to EMI than shielded cables. However, in most fire alarm applications, this is not a significant concern.

2. Not suitable for high-frequency applications: Unshielded cables may not be suitable for high-frequency applications, such as data communication lines, where shielding is necessary to prevent signal degradation.

Anixter FA-1404C-1-2N-03-500 14AWG Unshielded Fire Alarm Cable is a reliable and cost-effective solution for many fire alarm applications. Its compliance with NFPA and UL standards, durability, and flexibility make it an excellent choice for installers. While it may not offer the same level of EMI protection as shielded cables, this is not typically a concern in fire alarm systems. Therefore, we recommend this cable for most fire alarm installation projects.

Details:

Anixter FA-1404C-1-2N-03-500 14awg solid bare copper 4 conductor unshielded plenum red, fire alarm cable: the is a 14 awg solid bare copper cable designed for fire alarm systems and communication applications. The conductors are insulated with flame-retardant polyvinyl chloride fireplug, ensuring enhanced safety by preventing fire spread. With a temperature rating of 75 c and voltage 300v, this cable is well-suited for variety installations requiring high durability strict fire safety standards.key features: conductor material: bare copper type: solid insulation fireplug flame retardant polyvinyl chloride temperature rating: voltage : 300v. This unshielded, plenum-rated cable features four solid bare copper conductors, providing reliable and stable signal transmission.

Box at this time. This is not applicable to those who received a damaged package.

specifications alarmpartsacc:

• brand: Anixter
• mpn: Fa-1404c-1-2n-03-500
• type: Fire Alarm Cable

general alarmpartsacc:

• category: Business & Industrial > Surveillance Equipment > Systems > Alarm Parts Accessories

returns alarmpartsacc:

• method: money back
• time: 30 days
• policy: returns accepted
• paid by: seller

offer alarmpartsacc:

• sold #: 38
• in stock #: 1
• options: ship-to-home
• started: november 12, 2024
• availability: in stock
• price: $44.99
• item condition: New

shipping alarmpartsacc:

• service: ups ground
• class: standard
• carrier: ups
• transit: 2-6 days
• type: calculated

payments alarmpartsacc:

• wallet: paypal
• credit card: mastercard
• other

seller alarmpartsacc:

• # reviews: 2899
• rating: 99.1%
• city: atlanta, georgia