PG4945 DSC Powerg Wireless Door Window Contact

Review DSC Powerg Wireless Door/window Contact Aux 433mhz

The DSC PG4945 PowerG Wireless Door/Window Contact is a reliable and versatile security device designed to protect your home or business against unwanted intrusions. This contact sensor operates on the 433MHz frequency and is part of the PowerG wireless security system, which is known for its long-range, secure, and battery-operated features.

This sensor is designed to detect the opening or closing of doors or windows. It consists of two parts: a magnetically-held reed switch and a transmitter. The reed switch is installed on the door or window frame, while the transmitter is attached to the moving part of the door or window. When the door or window is opened, the reed switch is disconnected, and the transmitter sends a wireless signal to the control panel to alert you of the intrusion.

The DSC PG4945 PowerG Wireless Door/Window Contact is built with high-quality components that ensure accurate and reliable performance. It features a super-strong magnet that can securely hold the reed switch in place, even in high-traffic areas. The transmitter is equipped with a powerful 3V lithium battery that provides long-lasting operation, and the sensor can be easily programmed using the PowerG wireless security system.

One of the most notable features of the DSC PG4945 PowerG Wireless Door/Window Contact is its long-range wireless transmission. With a transmission range of up to 1,000 feet in ideal conditions, this sensor can reliably communicate with the control panel even in large homes or commercial buildings. Moreover, the PowerG wireless system uses frequency-hopping spread spectrum technology, which makes the signal more secure and less susceptible to interference from other wireless devices.

Another advantage of the DSC PG4945 PowerG Wireless Door/Window Contact is its low power consumption. The sensor goes into sleep mode when it's not in use, which helps conserve battery life and reduce false alarms. The battery status is indicated by an LED light on the transmitter, which turns red when it's time to replace the battery.

In summary, the DSC PG4945 PowerG Wireless Door/Window Contact is a high-performance, long-range, and battery-operated security sensor that is ideal for protecting doors and windows in homes or businesses. Its accurate and reliable performance, long-range wireless transmission, low power consumption, and easy programming make it a popular choice among security professionals and DIY homeowners.

The DSC PG4945 PowerG Wireless Door/Window Contact 433MHz is a wireless security device designed for use with DSC security systems. This contact sensor is used to detect the opening and closing of doors and windows. Let's examine the pros and cons of purchasing this device.

1. Long-range wireless transmission: The PowerG technology used in this contact sensor allows for a long-range wireless transmission, ensuring reliable communication between the sensor and the control panel even when the devices are far apart.

2. Superior signal reliability: The use of the PowerG technology also results in superior signal reliability, reducing the chances of false alarms or missed alerts.

3. Battery-powered: The sensor is battery-powered, making it easy to install without the need for wiring.

4. Tamper-resistant design: The contact sensor is designed to be tamper-resistant, making it difficult for intruders to disable the sensor without triggering an alarm.

5. Compatible with other PowerG devices: If you have other PowerG devices in your security system, this contact sensor will work seamlessly with them.

1. Limited compatibility with non-DSC systems: This contact sensor is specifically designed for use with DSC security systems, and may not be compatible with other brands or types of security systems.

2. Higher cost compared to wired sensors: Wireless sensors, including contact sensors, tend to be more expensive than their wired counterparts due to the added cost of the wireless technology.

3. Requires regular battery replacement: While the sensor is battery-powered, the batteries will need to be replaced periodically to ensure the sensor continues to function properly.

4. Potential for interference: Wireless signals can be susceptible to interference from other devices, which could potentially result in false alarms or missed alerts.

In conclusion, the DSC PG4945 PowerG Wireless Door/Window Contact 433MHz offers several advantages, including long-range wireless transmission, superior signal reliability, and a tamper-resistant design. However, it is important to consider the limitations, such as limited compatibility with non-DSC systems and the need for regular battery replacement. Ultimately, if you are in the market for a wireless contact sensor for a DSC security system and are willing to accept the higher cost and potential for interference, this sensor could be a good choice for you.

Recommendation: If you are in the market for a wireless contact sensor for a DSC security system, the DSC PG4945 PowerG Wireless Door/Window Contact 433MHz is a reliable and effective choice. Its long-range wireless transmission, superior signal reliability, and tamper-resistant design make it an excellent addition to your security system. However, be aware of the limitations, such as the limited compatibility with non-DSC systems and the need for regular battery replacement, and consider these factors before making your purchase.

Details:

Feature: auxiliary input. It operates at 433mhz and integrates with compatible Dsc systems. Type: wireless door/window contact. Wireless door/window contact for intrusion detection.

Operates on 433mhz frequency. Suitable for residential and commercial security applications. Application: intrusion detection and monitoring. Dsc PG4945 powerg wireless door/window contact w/ aux 433mhz.

Monitors open/close status of doors and windows. Designed for integration with Dsc powerg systems. Hub America is a USA-based technology distributor specializing in two-way communications, networking, and security solutions. Powerg wireless technology for secure communication.

Compatibility: Dsc powerg systems. /, security access control. The Dsc PG4945 is a powerg wireless door/window contact with auxiliary input, designed for intrusion detection and expanded monitoring. Technology: powerg.

specifications alarmpartsacc:

• brand: Dsc
• mpn: Pg4945
• type: Sirens Alarms
• country of origin: Canada

offer alarmpartsacc:

• sold #: 6
• availability: in stock
• options: ship-to-home
• prices: $43.34–$140.89
• item condition:
  • New
  • Open box
• started: april 14, 2026

general alarmpartsacc:

• category: Business & Industrial > Surveillance Equipment > Systems > Alarm Parts Accessories

shipping alarmpartsacc:

• transit: 4-11 days
• class: standard, expedited, one-day
• service: usps first class, usps priority mail, fedex standard overnight
• carrier: usps, fedex
• type: calculated

payments alarmpartsacc:

• wallet: apple-pay
• credit card: visa
• other

seller alarmpartsacc:

• rating: 99.4%
• city: miami, florida
• # reviews: 9545

returns alarmpartsacc:

• time: 30 days
• method: money back
• paid by: buyer
• policy: returns accepted